-
4-72 C/D Centrifugal Blower&Ventilation&Fan For Industrial
Power:3kW-355kw
Speed of mainshaft:630-2240RPM
Impeller Material:Steel Plate
Volt./Frequency:380V,415V, 50HZ,60HZ
Air Flow:805~220000m3/h
Power Supply:Electric Motor
Total head :95~3700Pa
Blower shell :Carbon Steel
-
ML Series Double-value Capacitor Aluminium Housing Single Phase Motor
Complying with National Standard,YL/ML Seris Single Phase Dual-Vaule Capacitor Induction Motor has the features of good starting and running performance,low noise,little vibration,light weight and small volumeeasy to maintance,etc.YL/ML motor could be widely used in air compressor ,water pumps ,blower fans,refrigerator ,medical machinery and small machinery.Particularlly suitable for place of single phase power supply only Motor Housing:Cast Iron or Aluminium Alloy
Protection Class IP44/IP54 Cooling Type IC0141 Insulation Class B or F Operation Type S1 Rated Volt. 115/230,220V Rated Frequency 60Hz(50Hz) Shell Material Aluminum alloy The height of aluminum housing electric motors in our company in 56-160mm.
The motors arrange to single phase and three phase asynchronous motors, the code is “M”.
These motors have good performance, safety little vibration and at the same time light weight and simple construction. -
Three Phase High Efficiency NEMA Induction Motor For Equipment Driving
NEMA Three Phase Motor runs with high efficiency, but very low temperature rise, lower noise and vibration. Voltage of the motor is 115/208-230V and frequency is 60Hz. The capacitor start and two valued capacitor NEMA motors are suitable for air compressor, small machine tools and other fields with high starting torque demands.
Specifications
Special motor NEMA standard
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;Features:
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;
NEMA Service Factor;
Insulation Class F;
UL approved;
IP Class:IP23; -
NEMA Low Temperature rise,Low Noise Single Phase Induction Motor
NEMA Standard Single Phase Asynchronous Electric Motor is designed and manufactured according to USA NEMA and Canada related standard. NEMA series single phase Asynchronous motor has many good virtures like novel pattern, excellent technic and reliable performance.
Specifications
Special motor NEMA standard
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;Features:
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;
NEMA Service Factor;
Insulation Class F;
UL approved;
IP Class:IP23; -
NEMA Standard Series Single Phase Asynchronus Motor
NEMA Standard Single Phase Asynchronous Electric Motor is designed and manufactured according to USA NEMA and Canada related standard. NEMA series single phase Asynchronous motor has many good virtures like novel pattern, excellent technic and reliable performance.
Specifications
Special motor NEMA standard
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;Features:
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;
NEMA Service Factor;
Insulation Class F;
UL approved;
IP Class:IP23; -
NEMA High Efficiency Single Phase Induction Motor
NEMA Standard Single Phase Asynchronous Electric Motor is designed and manufactured according to USA NEMA and Canada related standard. NEMA series single phase Asynchronous motor has many good virtures like novel pattern, excellent technic and reliable performance.
Specifications
Special motor NEMA standard
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;Features:
HP: 1/4HP-5HP;
Frame: 48C/56C/18C/21C;
Rolled steal;
NEMA design N;
NEMA Service Factor;
Insulation Class F;
UL approved;
IP Class:IP23; -
ISW Series Cast Iron 50Hz Horizontal Centrifugal Pump
1.the pump is in horizontal structure.the suction and discharge port shave the same diameter and on a same central line.it can be installed on the pipe line like a valve.the pump is compact with good profile,take less space and low construction investment.it can be used outdoor if covered by protection hood.
2.the impellers are installed directly on the extended shaft of the motor,the axial size is short and structure compact.the pump is rationally fitted with motor bearings too effectively balance the radial and axial load generated during pump operation,thus to guarantee the stable pump running low vibration and noise.
3.the shaft is sealed mechanically or with mechanic sealing set.the sealing rings are made of
titanium alloy.it is medium-size and high temperature resistant mechanical seals. The hardened axial metal alloy is wear resistant and can effectively improve the life
time of the mechanical seal.
4.installation and repair and done conveniently,no piping systems have to be removed to take out the whole rotor set except the screw linking the pump body and the base.
5.the pumps can be connected in series or parallel in operation according to the need of flow and -
ZW series 380V Cast Iron Self-Priming Sewage Pump
This pump have the function of self-priming and sewage discharge.
Like the normal clean water self-priming pump, without foot valve or water diversion, it is able to directly pump waste water with large particles and long fibers, impurity of goaf, feces and all the industrial waste water.And it is easy to handle, move, and install.
Work Conditions
1.Ambient temperature ≤ 45 medium temperature ≤ 60
2.The pH of medium: 6-9
3.Max grain diameter: 60% of the caliber of pump, Max fiber length: 5 times of the caliber.
4.Max percentage of the impurities: 15%; Max Medium gravity: 1240kg/m³Model NO: 40ZW 8-15 ~ 300ZW 800-14Influent Type of Impeller: Single Suction PumpPosition of Pump Shaft: Horizontal PumpPump Casing Combined: Horizontal Split PumpsMounting Height: Suction CentrifugalImpeller: OpenUsage: Pump, PumpsMax Flow: 300m3/hGasoline Generator Power Range: 1.kw-55kwInsulation: F ClassMechanical: Carbon/Ceramic/Stainless SteelBearing: Normal or C&U -
WQD-S Series Sewage Submersible Pump with CE
WQ (D) -S stainless steel casting sewage submersible pump used stainless steel precision casting shell, with corrosion resistance, environmental protection, high lift, large flow and so on.
Product Features：
1, The oil chamber with VITON double mechanical seal, the outer chamber with a single VITON mechanical seal structure, effectively reduce the friction between the sand and the shaft caused shaft abrasion problem.
2, The motor uses vacuum dipping paint to achieve F grade insulation, thermal protection device configuration, effectively extending the life of the pump.
3,According to customer requirements, it has stirring device, which can generate strong stirring force by the motor shaft rotation, discharged the suspended solids mixed from the sediment of sewage pool. It also has the cutting device, discharged long fiber, plastic, paper bags, straw and other debris of sewage.
4, Can be customized corrosion cable according to customer special requirements, PTFE seal, and high temperature motor (to solve the liquid temperature ≤ 100 ℃ use of the environment)Application：
It is suitable for building hospital, residential district, municipal engineering, road traffic and construction,chemical plating, factory sewage, aquaculture, medicine, beverage, salt water, solid particles, long fiber waste water and sewage contained in corrosive medium.
Conditions of Use：
1, whichever is the center of the impeller, submerged depth shall not exceed 5m;
2, the transmission medium temperature is not higher than +40 ℃;
3, the transmission medium PH value 304 (4-10), 316 (4-13);
4, the transmission medium kinematic viscosity of 7 × 10-7-23 × 10-6m2/s.
