CPM Series Domestic Centrifugal Water Pump
CPM Series Centrifugal Pumps are single stage centrifugal pumps, can be used to transfer clean water or other similar water in physical and chemical properties.
It is suitable for industrial use and urban water supply, pressure boosting for high buildings and fire system , garden irrigation, long-distance water transfer, heating ventilation and air controlling, circulation and pressure boosting for cold and hot water, and supporting equipment etc.
Application:
Clean water without abrasive particles/Non-aggressive liquid.
Domestic use.
In particular for deliverying water in combination with small pressure sets and for irrigation.
Installed in enclosed place, or at least protected against inclement weather.
Operating Conditions:
Suction lift up to 9mt
Liquid Temperature up to +40ºC
Ambient temperature up to +40ºC
Max. working Pressure: 6 bar
Motor:
2 pole induction motor
Single-phase, 50/60Hz
Protection IP 44
With capacitor and thermal overload protection
Material:
Pump body: Cast Iron
Motor Support: Aluminum/Cast Iron
Impeller: Brass
Motor Shaft: Stainless Steel or CS45#
Mechanical Seal: Ceramic-Graphite.
Motor winding: copper
Technical Data
| TYPE | Power Kw | Power HP | MAX. FLOW | MAX. HEAD | Inlet/Outlet | MAX.SUCT | N.W. | PACKING DIMENSION |
| CPM130 | 0.37 | 0.5 | 60L/min | 22M | 1″x1″ | 8M | 8.9KG | 28x19x24cm |
| CPM146 | 0.55 | 0.75 | 100L/min | 25M | 1″x1″ | 8M | 11KG | 32x20x25.5cm |
| CPM158 | 0.75 | 1 | 120L/min | 33M | 1″x1″ | 8M | 12KG | 32x21x27cm |
| CPM180 | 1.1 | 1.5 | 130L/min | 38M | 1″x1″ | 8M | 20KG | 36x26x32.5cm |
| CPM190 | 1.5 | 2 | 150L/min | 42M | 1″x1″ | 8M | 21KG | 36x26x32.5cm |
| CPM200 | 2.2 | 3 | 160L/min | 46M | 1″x1″ | 8M | 23KG | 36x26x32.5cm |
CPM PUMP EXPLODED VIEW
| NO. | DESCRIPTION | NO. | DESCRIPTION | NO. | DESCRIPTION | NO. | DESCRIPTION |
| 1 | “O” ring | 9 | Mechanical seal | 17 | Housing | 25 | Stand |
| 2 | Discharge plug | 10 | Bolt | 18 | Terminal board | 26 | Wound stator |
| 3 | Pump body | 11 | “O” ring | 19 | Capacitor | 27 | Rotor |
| 4 | Nut | 12 | Pump support | 20 | Terminal box cover | 28 | Split ring |
| 5 | Snap ring | 13 | Drops guard | 21 | Screw | 29 | Back cover |
| 6 | Washer | 14 | Bearing | 22 | Screw | 30 | Bolt |
| 7 | Impeller | 15 | Snap ring | 23 | Cable presser | 31 | Fan |
| 8 | Key | 16 | Bolt | 24 | Fairlead | 32 | Fan cover |
CPM PUMP CURVING
Packing & Shipping :
To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept
PAINTING COLOR CODE
ADVANTAGE:
Pre-sales service:
•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.
After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours.
